Go to content Go to main menu

Bulk hydrant water meter WPD-HY

The bulk hydrant water meter WPD-HY is used for paying water withdrawal from underground or above ground hydrants for irrigation, on construction sites or other temporary applications.

With the pre-assembled quick-release couplings of size C, the meter is ready for immediate use without further assembly work.
The meter is equipped with a 6-roller dry dial register (IP68) and a modulator disc. This enables electronic, reaction-free scanning and is the basis for remote reading of the meter data via radio with LoRaWAN® or wM-Bus. A combined M-Bus/pulse module is also possible. A mechanical pulser can also be connected in parallel. The housing made of aluminum and the practical stainless steel carrying handles facilitate mobile use. The generous stainless steel base ensures a secure footing even on uneven ground.

Find out moreBack to products

Product images

Woltman bulk hydrant water meter WPD-HY
Woltman bulk hydrant water meter WPD-HYWoltman bulk hydrant water meter WPD-HY

Information

Bulk hydrant water meter WPD-HY
Downloads

Features

  • Woltman parallel type
  • For horizontal installation
  • Housing coated inside and outside with drinking water approved powder coating
  • C size quick-release couplings
  • Carrying handle and feet made of stainless steel
  • Highest precision and reliability even in case of low flow rates
  • Flood-proof (IP68) hermetically sealed glass/copper register
  • Low starting flow and high overload security
  • Wide measuring range, low pressure loss
  • Hydraulic bearing relief
  • Long-term measuring stability
  • No straight inlet or outlet needed (U0/D0) according to OIML R49 and DIN EN ISO 4064
  • Prepared for remote reading
  • Register rotatable 355 °
  • Operating pressure MAP 16
  • Approved in accordance with MID

Application

  • For the consumption measurement of cold and clean drinking water or service water up to 50 °C
  • For measuring high flow rates

AMR Technologies

  • Can be combined with stationary GSM system
  • Can be retrofitted with a mechanical pulser
  • Retrofittable with EDC module (Electronic Data Capture):
    • EDC LPWAN radio module (868 MHz) for LoRaWAN®
    • EDC wireless M-Bus radio module (868 MHz)
    • EDC combined M-Bus and pulse module

Product options

Measuring Principle
  • Woltman parallel
Nominal Flow Q3 (≈ Qn)
  • Q3=40 (≈ Qn 25)
Nominal Diameter DN (mm)
  • DN 50
Temperature
  • Cold water up to 50 °C
Metrological Class horizontal (max.)
  • R 100
Operating pressure (max.)
  • MAP 16
Communication Technologies
  • Radio via LoRaWAN®
  • Radio via wireless M-Bus
  • Electronic Pulser
  • Radio Special System (GSM)

Downloads

You can download a PDF Viewer from acrobat.adobe.com to view PDF files.

Other ZENNER products

Discover other interesting products in our product range.

Product imageEDC communication module for water metersEDC communication module for water meters
EDC communication module for water meters
The EDC module is a clip-on module for secure remote reading to integrate water meters in Smart Metering AMR/AMI Systems by pulser, M-bus or radio (wireless M-bus).
Information
Product imageMobile wireless M-bus radio systemMobile wireless M-bus radio system
Mobile wireless M-bus radio system
The mobile wireles M-bus radio system especially for remote reading of water meters, heat meters and energy meters for heating and cooling according to DIN EN 13757-4.
Information