Bulk water meter WPH-N-CC 90°
The WPH-N-CC water meter by ZENNER is always used when high flow rates with a relative constant flow rate profile are to be measured.
Through its robust construction they not only are capable of covering a large measuring range, but the measuring accuracy is also long-term stable. The hydrodynamic optimized turbine is reliably operated already at small flow rates and “upwards” it has enough power reserves to reliably measure flow rate peaks. Especially strong bearings with low friction guarantee a
long life of the meter.
Reed sensors can always be retrofitted without damaging the calibration seal. Then the meter can be integrated with data communication or automation and control systems in a simple and flexible way.
Pulser values for Woltman Meters*
DN 40 – DN 125 Standard 100 L/Imp.
DN 150 – DN 300 Standard 1.000 L/Imp.
DN 400 – DN 500 Standard 10.000 L/Imp.
Information
Bulk water meter WPH-N-CC 90°
Downloads
Features
- Low start
- Good overload protection
- Large measurement range
- Removable measurement insert
- Low loss of pressure
- Hydraulic bearing pressure discharge for durable measurement stability
- Retrofittable with passive pulsers
- Protective metal cover as standard, plastic optional
- Flood-proof (IP68) hermetically sealed glass/copper register
- Dry dial counter with large indicator wheels makes reading easier
- Water meter for hot sanitary water up to 90°C
- Water meter for horizontal, vertical and angled installation positions
Product options
Measuring Principle |
|
Register |
|
Nominal Diameter DN (mm) |
|
Length without connectors |
|
Temperature |
|
Housing Material |
|
Metrological Class horizontal (max.) |
|
Operating pressure (max.) |
|
Communication Technologies |
|
Nominal Flow Qn |
|
Specified Units on Display |
|
Other ZENNER products
Discover other interesting products in our product range.